The ZHIYUAN CATCOM-100 4G Cat1 DTU user manual explains configuration, operation modes, and command usage for this wireless data transmission device.
This manual provides a detailed guide for the CATCOM-100 wireless data transmission unit, covering product overview, panel layout, and all configuration options. It describes three configuration methods—graphical interface, AT commands, and SMS—and explains the supported work modes such as transparent transmission, simple command SMS, and MQTT.
The document also includes information on hardware specifications, indicator LEDs, power requirements, serial interfaces, GPIO ports, and how to interpret status lights. Additional sections cover server registration packets, traffic statistics, and a disclaimer from Guangzhou ZHIYUAN Electronics. This manual is written in Chinese.
| Power input voltage range | DC 9V~36V |
|---|---|
| Recommended adapter power | ≥4.5W |
| Serial interfaces | 1× RS‑232, 1× RS‑485 |
| RS‑232 baud rate range | 1200–250000 bps |
| RS‑485 baud rate range | 1200–500000 bps |
| GPIO ports | 2 (GPIO0, GPIO1) |
| Indicator LEDs | 5 (SYS, STATE, DATA, LTE, SIGNAL) |
It supports Mobile 2G/4G, Unicom 2G/4G, and Telecom 4G networks.
The device provides one RS‑232 port and one RS‑485 port.
A 9 V, 12 V or 24 V adapter with at least 4.5 W output is recommended.
There are five LEDs—SYS, STATE, DATA, LTE, and SIGNAL—indicating system status, connection state, data activity, network type, and signal strength.