User manual for Valore LED Wooden Alarm Clock models V-LWC169, V-LWC170, and V-LWC171 with setup, operation, and specifications.
The Valore LED Wooden Alarm Clock combines a modern wooden design with touch‑sensitive controls, offering two display modes (time / temperature) and four levels of brightness. It runs on four AAA batteries (not included) and can be powered via a DC5 V input.
This manual explains how to set the date and time, configure up to three alarms, adjust luminance, use sound control, and reset the device. Safety precautions, warranty information, and technical support contacts are also provided.
| Battery type | 4 x AAA (battery not included) |
|---|---|
| Power input | DC5V |
| Material | MDF+PVC |
| Dimensions (V‑LWC169) | 120 × 80 × 70 mm |
| Weight (V‑LWC169) | 170 g |
| Dimensions (V‑LWC170) | 125 × 45 × 65 mm |
| Weight (V‑LWC170) | 160 g |
| Dimensions (V‑LWC171) | 100 × 40 × 60 mm |
| Weight (V‑LWC171) | 120 g |
| Display modes | Time & temperature (alternating) or Time only |
Press and hold the ‘Set’ button for about 3 seconds to enter setting mode, then use the Up/Down buttons to select Year, Month, Date, Hour, and Minute, confirming each with the Set button.
In Normal mode, press and hold the Up button for about 3 seconds to enter luminance adjustment, then cycle through the four brightness levels (L3 → L2 → L1 → L0).
Press the Down button to toggle sound ON/OFF; the LED display automatically turns off after 5 seconds of silence and re‑activates when a sound over 60 dB or a tap is detected.
Press the Reset button at any time to restore the clock to its factory settings and clear all user configurations.