Testo 511 absolute pressure measuring instrument instruction manual with basic settings, measurement steps, maintenance and technical data.
This instruction manual covers the Testo 511, an absolute pressure measuring instrument. According to the document, it is normally used to measure absolute pressure, for example for pressure compensation in velocity measurement in ducts, laboratories and production processes; further measurement parameters are barometric (surface) pressure and altitude above sea level. The manual is provided in German, English, French, Spanish, Italian and Portuguese, and includes a short manual section plus full operating instructions.
The text describes the instrument parts (protection cap, absolute pressure sensor nipple connection, display, control keys, battery compartment with holding magnets on the rear), first steps such as inserting two AAA batteries and making basic settings (altitude unit and value, pressure unit, auto off), switching between measured parameters and display views, resetting max/min values, replacing batteries, cleaning the housing, and a short troubleshooting section. Measurement data, further instrument data, the EC Directive and warranty duration are listed in the technical data. This manual is written in German.
| Sensor | Absolute pressure sensor |
|---|---|
| Parameters (absolute/barometric) | Pa, hPa, mbar, mmH2O, mmHg, inHG, inH2O, psi |
| Measuring ranges | 300...1,200 hPa, 120.4...481.8 inH2O |
| Resolutions | 0.1 hPa, 0.01 inH2O |
| Accuracy (nominal temperature 22 °C, ±1 digit) | ±3 hPa, ±1.2 inH2O |
| Measuring rate | 0.5 s |
| Protection class | IP40 |
| Ambient conditions | 0...50 °C, 32...122 °F |
| Storage/transport conditions | -40...70 °C, -40...158 °F |
| Voltage supply | 2x 1.5 V type AAA |
| Battery life | 200 h (without display light) |
| Dimensions | 119x46x25mm / 4.7x1.8x1.0 in (incl. protection cap) |
| Weight | 90g / 3.2 oz (incl. batteries and protection cap) |
| EC Directive | 2004/108/EEC |
| Warranty duration | 2 years |
It is an absolute pressure measuring instrument, normally used to measure absolute pressure, for example for pressure compensation in velocity measurement in ducts, laboratories and production processes.
Two 1.5 V type AAA batteries, inserted in the battery compartment after sliding the battery cover down.
The readings are outside the measuring range (too high or too low), so the permissible measuring range must be observed; if residual capacity is under 10 minutes, replace the batteries.
The display light switches off automatically 10 s after the last key press.