Instruction manual for the testo 460 tachometer, covering setup, measurement, maintenance and troubleshooting.
The testo 460 is a tachometer generally intended for measuring rotational speeds, such as propellers, cylinders and spindles. It uses an optical LED sensor and can display values in rpm or rps.
The manual describes safety information, device and product overview, battery installation, configuration, measurement procedure with reflective bands, display modes, maintenance, and troubleshooting. This manual is written in French.
| Sensor | Optical LED |
|---|---|
| Measurable quantities | rpm, rps |
| Measurement range | 100 to 30000 rpm; 1.7 to 500.0 rps |
| Resolution | 0.1 rpm (100.0 to 999.9 rpm), 0.1 rps (1.7 to 17.0 rps), 1 rpm (1000 to 30000 rpm), 1 rps (17.0 to 500.0 rps) |
| Accuracy | ±0.02% of average value (at 22 °C nominal temperature, ±1 digit) |
| Measurement frequency | 0.5 s |
| Protection rating | IP40 |
| Operating temperature | 0 to 50 °C (32 to 122 °F) |
| Storage/transport temperature | -40 to 70 °C (-40 to 158 °F) |
| Power supply | 2 x 1.5 V AAA |
| Battery life | 20 h without display backlight |
| Dimensions | 119 x 46 x 25 mm including protective cap |
| Weight | 85 g including batteries and protective cap |
| Warranty | 2 years |
The ideal distance is 10 to 40 cm.
Battery life is 20 h without display backlight.
The protection type is IP40.
Hold the button down for 2 seconds.