Sika-101 Mortero is a cement-based waterproofing mortar for tanks, pools, retaining walls, and concrete surfaces. Easy to apply, breathable, and…
Sika-101 Mortero is a cement-based waterproofing mortar designed for use on concrete surfaces such as tanks, pools, retaining walls, and foundations. It allows surfaces to breathe and is resistant to weathering. The product is easy to apply and maintain, with options for textured finishes. It can be used in contact with potable water and applied directly on non-porous surfaces without priming.
Application requires preparing the surface by cleaning and wetting it thoroughly. Mix 3 parts Sika-101 Mortero with 1 part clean water. Apply in two coats, with the second coat applied after 12 hours. Keep the surface moist during curing for best results. The product is available in 2kg, 5kg, 10kg, and 25kg bags and must be stored in dry, covered conditions. This manual is written in Spanish.
| Minimum Thickness | 1 mm in two coats |
|---|---|
| Mix Ratio | 3 parts Sika-101 Mortero to 1 part water |
| Density of Mixture | 2.3 kg/l approximately |
| Consumption | Approximately 2 kg/m² for two coats |
| Minimum Temperature | 5°C |
| VOC Content | < 340 gr/l |
Yes, it can be applied directly on non-porous surfaces without priming.
Mix 3 parts Sika-101 Mortero with 1 part clean water by volume.
Two coats should be applied, with the second coat applied after 12 hours.
The minimum temperature for application is 5°C.