Rockwell Automation 5069-IB8S/IB8SK Compact 5000 I/O 8-Point Safety Sinking Input Module Installation Guide

Installation instructions for the Rockwell Automation 5069-IB8S and 5069-IB8SK Compact 5000 I/O 8-point safety sinking input modules.


Rockwell Automation 5069-IB8S/IB8SK Compact 5000 I/O 8-Point Safety Sinking Input Module Installation Guide - cover page
Brand
Rockwell Automation
Category
Automation control Equipment
Document type
Installation Guide
Language
Chinese
Pages
12
File format
PDF
File size
2.6 MB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
9D0C827B8C1C574D5F9081CECE1391B4

About this manual

The Rockwell Automation 5069-IB8S and 5069-IB8SK are Compact 5000 I/O 8-point safety sinking input modules. They provide safety I/O on a safety control network that meets SIL CL3 and PLe, Cat. 4 as specified in IEC 61508, IEC 61511, IEC 62061 and ISO 13849-1. The modules can be used as local and remote I/O with CompactGuardLogix 5380 controllers and as remote I/O with GuardLogix 5580 controllers.

The 5069-IB8SK has the same functions as the 5069-IB8S but adds a conformal coating to help protect it in harsh environments. Modules are configured with Studio 5000 Logix Designer software, and the controllers require firmware version 32.011 or later. The installation instructions cover mounting the system and removable terminal block, installing the module and end cap, wiring and disconnecting the terminal block, using cable ties, powering the system, removing the module, technical specifications and additional resources. This manual is written in Chinese.

What's inside

  • About the module
  • Install the system
  • Install the removable terminal block
  • Install the module
  • Install the end cap
  • Wire the removable terminal block
  • Disconnect wires from the removable terminal block
  • Use cable ties
  • Power the system
  • Technical specifications

Specifications

Input points8 safety sinking inputs
Safety integritySIL CL3; PLe, Cat. 4
Applicable standardsIEC 61508, IEC 61511, IEC 62061, ISO 13849-1
Controller compatibilityLocal and remote I/O with CompactGuardLogix 5380; remote I/O with GuardLogix 5580
Minimum controller firmware32.011 or later
Communication modeProducer/consumer
5069-IB8SK coatingConformal coating

Frequently asked questions

What controllers can the 5069-IB8S and 5069-IB8SK modules be used with?

They can be used as local and remote I/O with CompactGuardLogix 5380 controllers and as remote I/O with GuardLogix 5580 controllers.

What is the difference between the 5069-IB8S and 5069-IB8SK?

The 5069-IB8SK provides the same functions as the 5069-IB8S but has a conformal coating to help protect it in harsh environments.

What firmware version is required to use Compact 5000 I/O safety modules?

CompactGuardLogix 5380 and GuardLogix 5580 controllers must use firmware version 32.011 or later.

What communication mode do the modules use?

The modules use producer/consumer communication mode.

Download PDF (2.6 MB)

More Rockwell Automation Manuals


View all Rockwell Automation manuals →