Service manual for the Rinnai Infinity REU-V2632FFUG and HD200i REU-VM2632FFUC continuous flow gas hot water systems, covering service, fault finding and parts.
This service manual is for the Rinnai Infinity REU-V2632FFUG and HD200i REU-VM2632FFUC temperature controlled continuous flow gas hot water systems. It is Issue 1, dated 16/12/09, and was produced by Rinnai Australia Engineering & Technical Group.
The manual covers specifications, water flow rates and pressures, dimensions, water controllers, wiring diagrams, dip switch settings, fault finding, maintenance monitor and error history, gas pressure and conversion procedures, dismantling for service, a parts list and an exploded diagram. It includes service contact points and warns that all service work must be carried out by an authorised person.
| Model number | REU-V2632FFUG / REU-VM2632FFUC |
|---|---|
| Type of appliance | Temperature controlled continuous flow gas hot water system |
| Combustion system | Room sealed, fan forced combustion |
| Dimensions | Width 350 mm, height 600 mm, depth 259 mm |
| Weight | 21 kilograms |
| Gas consumption | Natural gas 16–195 MJ/h; propane gas 16–195 MJ/h |
| Maximum hot water capacity | 26 L/min at 25°C rise |
| Minimum water flow for operation | 2.4 L/min |
| Electrical consumption | 45 W normal; 2 W standby with 1 water controller |
| Power supply | Appliance: AC 240 V 50 Hz; water controller: DC 12 V |
It is a temperature controlled continuous flow gas hot water system.
The minimum water flow for operation is 2.4 L/min.
Rinnai recommends that this appliance be serviced every 3 years.
A maximum of 4 water controllers can be fitted.