Osprey Aether/Ariel Series backpack owner's manual covering AirScape suspension fit, IsoForm harness and hipbelt, pack access, compression and size charts.
This owner's manual from Osprey walks through the Aether and Ariel Series packs feature by feature, starting with the AirScape Suspension System built around a LightWire alloy peripheral frame, a ventilated ribbed foam backpanel with grip mesh, an HDPE frame sheet and a 2/3 length aluminum stay (HDPE integral stay on the Aether 60 and Ariel 55). It explains how to fit the suspension to the body first and then adjust the pack onto the suspension using the hipbelt, shoulder strap adjusters, load lifters and sternum strap.
The manual also describes the gender-specific IsoForm harness and IsoForm CM heat moldable hipbelt with ErgoPull closure, the detachable top pocket that converts into a lumbar pack, the three pack access points, internal and StraightJacket compression, hydration compatibility, stretch woven pockets, Stow On The Go trekking pole attachment, dual tool tie-offs, AddOns compatibility and pack care. Capacity and weight tables for the Aether 85/70/60 and Ariel 75/65/55 sizes close the document.
| Aether 85 M capacity and weight | 5200 cu.in. / 85 L; 5 lb 1 oz / 2.30 kg |
|---|---|
| Aether 60 M capacity and weight | 3700 cu.in. / 60 L; 4 lb 15 oz / 2.23 kg |
| Ariel 75 M capacity and weight | 4600 cu.in. / 75 L; 5 lb 0 oz / 2.27 kg |
| Ariel 55 M capacity and weight | 3400 cu.in. / 55 L; 4 lb 14 oz / 2.21 kg |
| Torso adjustment range | up to 4 in / 10 cm |
| Key fabrics | 210D Nylon Block Shadow, 420HD Nylon Pack Cloth, 500D Plain Weave Nylon Oxford, Stretch Woven Nylon |
Loosen all straps, put the pack on and snug down the hipbelt, then pull the lower shoulder strap adjusters into a comfortable position and pull the load lifter straps without letting the harness rise off the shoulder.
Loosen the webbing enough to connect the center buckle, then grasp the loose ends on either side and pull in and across evenly with both hands at the same time.
Each pack has three access points: a top load opening, a J-Zip front panel entry and a dual-zippered sleeping bag compartment.
A sewn-in backpanel hydration sleeve and hanger hold the reservoir, and the hose routes through one of two H2O ports at the top sides of the pack.