Osprey Talon Series owner's manual covering pack features, torso adjustment, hydration, helmet clip, trekking pole attachment, capacities, weights and pack…
This is the owner's manual for the Osprey Talon Series of technical backpacks, covering the Talon 44, 33, 22, 11, 8 and 4. It walks through the shared features of the series, such as the AirScape™ backpanel, the torso adjustable harness, the BioStretch™ harness, strap retention, the external hydration compartment and the tow loop, and explains how to operate each one step by step.
The manual then describes the individual models with numbered callouts, including the top-loading Talon 44 and 33, the panel-loading Talon 22 and 11, and the Talon 8/4 lumbar packs. It also covers the LidLock™ helmet clip, the Stow On the Go™ trekking pole attachment, the ErgoPull™ hipbelt, size/capacity/weight tables, key fabrics, pack care, loading advice and the Osprey guarantee.
| Talon 44 capacity and weight (S/M) | 42 l; 2 lb 3 oz / 0.99 kg |
|---|---|
| Talon 44 capacity and weight (M/L) | 44 l; 2 lb 7 oz / 1.11 kg |
| Talon 33 capacity and weight (S/M) | 31 l; 1 lb 13 oz / 0.82 kg |
| Talon 22 capacity and weight (S/M) | 20 l; 1 lb 10 oz / 0.73 kg |
| Talon 11 capacity and weight (S/M) | 9 l; 1 lb 6 oz / 0.62 kg |
| Talon 8 capacity and weight | 8 l; 13 oz / 0.36 kg |
| Talon 4 capacity and weight | 4 l; 11 oz / 0.31 kg |
| Key fabrics | 70D x 100D Nylon Shadow Check, 160 x 210D Nylon Shadow Box |
| Backpanel | Mesh covered, 4 mm HDPE ridge molded foam with integrated channels and central air chimney |
Loosen the load lifter straps at the top of the harness, slide your hand between the backpanel and harness to release the hook and loop closure, then slide the harness into position using the arrows as a guide.
The Talon 44 holds 42 liters in the S/M size and 44 liters in the M/L size.
Clean the pack out thoroughly after each trip, hang it to dry if wet, loosen all the straps and wash it every now and then. Osprey recommends Nikwax® products for pack care.
Locate the LidLock™ clip near the top of the front panel, pull it away from the pack, then pass it through a helmet vent from the bottom and engage it in the horizontal position.
Shorten the poles, pull the elasticized cord loop on the lower left side of the pack away from the side pocket and insert the basket end, then place the pole handles in the bungee loop on the left harness strap and tighten.