The Onkyo TX‑NR515 AV receiver instruction manual provides safety guidelines, setup, connections, basic and advanced operation instructions.
This manual covers safety information, supplied accessories, and detailed connection diagrams for the Onkyo TX‑NR515 AV receiver. It explains how to install the unit, connect speakers, HDMI sources, antennas, and network features, and provides step‑by‑step instructions for turning the receiver on, basic operation, and advanced settings such as Audyssey, speaker setup, and zone‑2 configuration.
Additional sections include troubleshooting, firmware updates, remote‑control code tables, and a full specifications sheet. The document also contains regulatory compliance notes for North American, European, Canadian, and other regional models.
| Output Power (North American) | 80 W per channel (8 Ω) |
|---|---|
| Output Power (IEC) | 130 W per channel (6 Ω) |
| Output Power (JEITA) | 160 W per channel (6 Ω) |
| Frequency Response (DSP bypass) | 5 Hz – 100 kHz |
| Power Consumption (North American) | 5 A |
| Dimensions | 435 mm × 173.5 mm × 328 mm (W × H × D) |
| Weight (North American) | 9.0 kg (19.8 lb) |
| HDMI Inputs / Outputs | 8 inputs (1 front) and 2 outputs |
Leave at least 20 cm (8 in) of free space at the top and sides and 10 cm (4 in) at the rear of the unit.
Turn the receiver on and, while holding down the CBL/SAT button, press the ON/STANDBY button.
Use AC 120 V 60 Hz for North American/Taiwanese models, AC 230 V 50 Hz for European/Australian models, and AC 220‑240 V 50/60 Hz for other regions.
This manual explains 3 error codes. Open a code for its meaning, causes and what to do: