This guide provides disassembly, reassembly, torque specifications, parts lists, and troubleshooting instructions for Nordson EFD 725HF-SS and 725HF-A…
This document serves as a maintenance and parts guide for the Nordson EFD 725HF-SS and 725HF-A piston valves. It details the step-by-step procedures for disassembling and reassembling the valve to prevent damage, emphasizing the need to clean parts and replace O-rings and seals before reassembly. The guide specifies the use of Nye Lubricant #865 for lubrication during the process.
| Minimum operating air pressure | 4.8 bar (70 psi) |
|---|---|
| Sealing head screw torque | 1.69 Nm (15 inch pounds) |
| Stainless steel fluid body torque | 10.8 - 13.6 Nm (8 - 10 foot pounds) |
| Acetal fluid body torque | .033 Nm (.30 inch pounds) |
| Shaft locking screw torque | 2.82 Nm (25 inch pounds) |
| Air cylinder cap torque | 10.8 Nm (8 foot pounds) |
The valve operating air pressure must be at least 4.8 bar (70 psi) to open.
Parts indicated in the guide should be lubricated with Nye Lubricant #865.
This is caused when air is trapped in the outlet section of the fluid body or the fluid has entrapped air.
Fluid flowing out of the drain hole indicates a ruptured diaphragm.