Leaflet for the Nordson EFD 741V Series needle valve with BackPack valve actuator for low-viscosity fluid dispensing.
The 741V Series Needle Valve applies low-viscosity fluids like silicone oils, solvents and UV-cure adhesives in accurate, repeatable amounts. Its stainless steel needle seats in the tip adapter, leaving virtually no dead fluid volume between shots.
The BackPack Valve Actuator maintains constant pressure at the actuating air inlet and uses miniature solenoid technology for actuation speeds as low as 5-6 milliseconds and cycle rates exceeding 60-80 Hz. The leaflet also covers electrical and air inputs, dimensions, weight, materials, and compatible controllers, robots, reservoirs and dispense tips.
| Electrical input | 24 vdc, 4 Watts |
|---|---|
| Air input | 70-90 psi (4.8-6.2 bar) |
| Minimum actuation time | 5 milliseconds |
| Maximum actuation time | Continuous ON |
| Cycling frequency | 60-80 hertz |
| Actuation speed | 5-6 milliseconds |
| Cycle rate | exceeds 60-80 hertz |
| BackPack dimensions | 0.874" deep x 1.05" high x 0.95" wide (22.20mm x 26.7mm x 24.10mm) |
| Weight (BackPack only) | 52.635 grams (1.85 oz) |
| Weight (741V-SS-BP) | 370.1 grams (13.05 oz) |
| Wetted components | 303SS and PTFE |
| BackPack housing material | Anodized aluminum |
| BackPack mounting bolt material | 303SS |
| BackPack O-ring material | Buna-n |
It applies low-viscosity fluids like silicone oils, solvents and UV-cure adhesives in accurate, repeatable amounts.
The electrical input is 24 vdc at 4 Watts.
The cycling frequency is 60-80 hertz.
They are used with ValveMate 8000 controllers or EFD Robot automation systems.