This user manual covers the operation, configuration, and calibration of Nokeval autopowered LED display indicators for models 301, 302, 305, and 306.
This manual provides instructions for Nokeval autopowered LED display indicators, which operate on a 4-20 mA current signal without requiring an external power supply. The document covers four specific models: the basic 301, the 302 with alarm contacts, and the smaller 305 and 306 variants. It details the front panel buttons and indicators used for scaling, alarm setting, and configuration.
| Power Supply | 4-20 mA current signal |
|---|---|
| Loop Resistance | 240 ohm only |
| Display Type | 4-digit red LED |
| Case Protection | IP65 |
| Case Material | ABS-plastic, grey |
| Dimensions (301/302) | 100 x 100 x 57 mm |
| Dimensions (305/306) | 82 x 80 x 57 mm |
| Ambient Temperature | 0...+60 °C |
| Accuracy | 0.05% of span |
| Alarm Relay Rating | 250 VAC, 150 mA |
No, they are autopowered by the 4-20 mA current signal.
Press and hold the ★ and ▲ keys simultaneously for 2 seconds.
Press and hold the ★ and ➤ keys simultaneously for 2 seconds while connecting the input signal.
The maximum loop resistance is 240 ohm for standard models and 340 ohm for models with alarms.