Mettler Toledo Seven2Go pro S9 Dissolved Oxygen Meter Operating Instructions

Operating instructions for the Mettler Toledo Seven2Go pro S9 portable dissolved oxygen meter, covering setup, calibration, measurement, data management and…


Mettler Toledo Seven2Go pro S9 Dissolved Oxygen Meter Operating Instructions - cover page
Brand
METTLER-TOLEDO
Category
Analyzers
Document type
User Manual
Language
English
Pages
44
File format
PDF
File size
1.4 MB
Published
16 November, 2026
Updated
16 November, 2026
MD5 checksum
21563D22C021A3CB56791F40F4EBB839

About this manual

This document is the operating instructions for the METTLER TOLEDO Seven2Go™ pro DO Meter (S9), a portable meter for measuring dissolved oxygen. It explains the meter's design and controls, safety measures, putting the instrument into operation, instrument setup, DO settings, sensor calibration, sample measurement, data management, maintenance and technical data.

The Seven2Go meters are designed for use in the laboratory, at-line or outdoors, with simple menus, T-pad hard keys, rubber side-guards for one-handed operation, an IP67 rating for the entire measurement system, and accessories such as the electrode clip, meter base stabilizing unit, wrist strap and uGo™ carrying case.

What's inside

  • Introduction
  • Safety Measures
  • Design and Function
  • Putting into Operation
  • Instrument Setup
  • DO Settings
  • Sensor Calibration
  • Sample Measurement
  • Data Management
  • Maintenance

Specifications

Sensor inputDO (digital), Mini-LTW (IP67)
Measuring range (DO)0.00…50.0 mg/L (ppm)
DO saturation measuring range0.0…500%
Pressure measuring range500…1100 mbar
Temperature measuring range0…50 °C
Batteries4 x LR6/AA 1.5 V Alkaline or 4 x HR6/AA 1.3 V NiMH rechargeable
Battery life (standby)200…250 hrs
DimensionsHeight 222 mm, Width 70 mm, Depth 35 mm
Weight290 g
Ambient temperature0…40 °C
Memory size2000 (GLP conform)
Calibration points2
Housing materialABS/PC reinforced

Frequently asked questions

How do I switch the Seven2Go meter on and off?

Press and hold the On/Off key for 1 second to switch the instrument on, or hold it for 3 seconds to switch it off.

What batteries does the Seven2Go pro S9 use?

The meter uses 4 x LR6/AA 1.5 V alkaline batteries or 4 x HR6/AA 1.3 V NiMH rechargeable batteries, and can also be powered via Micro-USB (5 V, 200 mA).

Is the measurement system protected against water and dust?

Yes, the entire measurement system including meter, sensor and connection cables has an IP67 rating.

What is the DO measuring range of the S9 meter?

The dissolved oxygen measuring range is 0.00…50.0 mg/L (ppm) with a resolution of 0.01.

Download PDF (1.4 MB)

More METTLER-TOLEDO Manuals


View all METTLER-TOLEDO manuals →