Operating manual for the Matrix Elektronik IRD-010-XB2-OP photoelectric proximity switch, covering technical data, wiring, mounting, and ATEX/IECEx use.
This operating manual documents the Matrix Elektronik IRD-010-XB2-OP photoelectric proximity switch for industrial and hazardous-area applications. It lists technical data, Ex protection markings, wiring diagrams, LED indications, accessories, options, and certification details.
The manual also covers mounting prescriptions, function and sensing range, maintenance, general safety instructions, and the EC/EU declaration of conformity. It states that the sensor must not be used for failsafe applications and that repairs or servicing must be performed by the manufacturer.
| Optical range | 1 m, adjustable |
|---|---|
| Light source | Infrared 870 nm |
| Response time | 5 ms |
| Power-up delay time | 500 ms |
| Supply voltage | 24 VDC ±10% |
| Absolute maximum supply voltage | 30 VDC |
| Current consumption | 61 mA |
| Maximum power dissipation | 1.61 W |
| Output | PNP type, 100 mA, short-circuit protected |
| Housing | M30, brass, nickel plated |
| Enclosure rating | IP67 |
| Ambient working temperature range | -20°C to +60°C |
| Storage temperature range | -30°C to +70°C |
| Relative humidity | 15% to 80%, non-condensing |
| Vibration resistance | 30 g over 20 Hz to 2 kHz |
| Shock resistance | 100 g for 3 ms |
| Pollution degree | 4 |
| Connection cable | 3 + PE x 0.5 mm², TPU, shielded, halogen free, 3 m |
| Maximum optical radiant power | ≤15 mW |
| Maximum optical radiant intensity | ≤5 mW/mm² |
| Optical beam pattern | approx. 10° |
| IECEx certification number | IECEx BVS 14.0108X |
| ATEX EC-type certification number | BVS 10 ATEX E 130 X |
The optical range is 1 m and is adjustable. The nominal range is specified on white A4 paper and is influenced by the color, kind of surface, and shape of the object.
Green shows safe operation, yellow shows that only poor reflected light is detected, and red shows that no reflected light is recognized.
Equipment must only be repaired or serviced by the manufacturer.