Operating manual for the Matrix Elektronik IRG-10I-Z8 and IRG-10I-Z8-S099 photoelectric proximity switches, covering technical data, wiring and mounting.
This is the original operating manual for the Matrix Elektronik IRG-10I-Z8 and IRG-10I-Z8-S099 photoelectric proximity switches. It lists the technical data of the two types, including an adjustable range of 1000 mm on white paper, 24 VDC supply, one PNP and one NPN output, a 1000 Hz switching frequency and a 40 ms pulse-stretching time function, and it shows the M18 and M12 socket wiring assignments.
The manual also gives general mounting prescriptions, explains operation as a proximity switch or as a light barrier depending on supply polarity, and describes range adjustment with the potentiometer, the status LED, maintenance and cleaning, general safety instructions, disposal notes and the EC declaration of conformity. Dimension drawings for both types are included.
| Range (adjustable) | 1000 mm on white paper 20x30 cm |
|---|---|
| Supply voltage | 24 VDC ±15% |
| Current consumption | 50 mA |
| Max. power dissipation | 1.38 W |
| Outputs | 1 x PNP and 1 x NPN, short circuit protected |
| Max. output current | 100 mA |
| Switching frequency | 1000 Hz |
| Time function | Impulse stretching at 40 ms |
| Hysteresis | Axially approx. 10% from range, radially approx. 2% from range |
| Ambient temperature range | -20 °C < T amb < +50 °C |
| Enclosure rating | IP65 (EN 60529) |
| Electrical connection | M18 socket; M12 socket on type IRG-10I-Z8-S099 |
The switching frequency is 1 kHz, with pulse-stretching at 40 ms.
The optimal range can be adjusted with the potentiometer.
It always lights when the sensor detects light, independently of the polarity of the supply voltage.
Clean them with alcohol; do not use aggressive solvents.