Marley Rainwater Systems design and installation guide covering gutter profiles, downpipes, Life4, jointing, bracketry and product specifications.
The Marley Rainwater Systems design and installation guide covers the Marley Plumbing & Drainage rainwater range, which consists of nine gutter profiles and seven downpipe options. It describes profiles including Flowline, Clip-master, Deepflow, Regency, Highflo, Foundry Finish, Deepflow150 and Stormflo, and lists sizes, colours and fittings for 68mm circular downpipes.
The document explains Life4 capping-layer technology, the easyclip jointing system and notch adaptor, and provides sections on roof drainage design, gutter jointing, gutter position and bracketry, downpipes, and standards and general information.
| Gutter profiles | Nine |
|---|---|
| Downpipe options | Seven |
| Life4 profiles | Five key profiles |
| Flowline profile size | 112 x 60 mm rectilinear |
| Clip-master profile size | 112 x 49 mm nominal half round |
| Deepflow profile size | 110 x 75 mm semi-elliptical |
| Highflo flow rate | Up to 6 l/s |
| Deepflow150 flow rate | Up to 6.0 litres a second |
| Stormflo flow rate | Up to 14 l/s |
| 68 mm circular downpipe standard | BS EN 12200 |
| Deepflow and Clip-master standard | BS EN 607 |
The range consists of nine gutter profiles and seven downpipe options.
The easyclip uses twin compression tabs to apply downward pressure onto the gutter seal for a watertight joint, and it also makes dismantling the joint easy.
Life4 uses a higher specification material to form a high-gloss capping layer on the outside of the gutter or pipe, with a standard PVCu inner layer.
Stormflo has a flow rate of up to 14 l/s.