Lite-On LTDL-TA25A/L4 optical transmitter module data sheet with features, ratings, electrical optical characteristics, measurement methods and cautions.
This is the Lite-On Technology Corporation data sheet for the LTDL-TA25A/L4 optical transmitter module, a water clear compound packaged device for high speed optic signal transmission with a TTL compatible interface, built-in LED driver and low power consumption. It gives the package dimensions, the input/output logic table for VDD, Vin and LED states, and the absolute maximum ratings.
The document also lists the electrical and optical characteristics at 25 degrees C, including transmission speed, operating voltage, peak emission wavelength, fiber coupling light output and timing values, followed by the measurement methods for optical output coupling power, power dissipation and pulse response, typical characteristic curves, and cautions on storage and ESD handling.
| Interface | TTL compatible |
|---|---|
| Transmission speed | 25 Mbps (NRZ signal) |
| Operating voltage (VDD) | 2.75 V min, 5.25 V max |
| Peak emission wavelength | 630 nm min, 650 nm typ, 690 nm max |
| Fiber coupling light output | -21 dBm min, -17 dBm typ, -15 dBm max |
| Dissipation current (IDD) | 5 mA typ, 12 mA max |
| Viewing angle | 90 deg (2 theta 1/2) |
| Supply voltage, absolute maximum | -0.5 V to +7 V |
| Power dissipation, absolute maximum | 120 mW |
| ESD, human body model | 3K V |
| Operating temperature range | -25 to +70 degrees C |
| Storage temperature range | -40 to +70 degrees C |
The maximum transmission speed is 25 Mbps with an NRZ signal.
The operating voltage VDD ranges from 2.75 V minimum to 5.25 V maximum.
The peak emission wavelength is 650 nm typical, within a range of 630 to 690 nm.
Devices stored out of their original package for more than eight hours should be baked at about 100 plus or minus 5 degrees C for at least 4 hours before assembling.