User manual for the Leisai CL2C Series integrated closed-loop stepper driver, covering installation, interfaces, Modbus RTU communication, and PR control.
The CL2C Series is a Leisai integrated closed-loop stepper driver with a built-in controller. It uses an RS485 interface and Modbus RTU protocol, supports control of up to 31 drives, and provides a 16-segment position table (PR) function. The manual covers product introduction, delivery checks, installation, interface and terminal wiring, brake connections, common functions, Modbus RTU, PR functions, and host software.
It also includes safety and installation notes, such as a maximum encoder cable length of 20 m, at least 10 mm clearance between the drive and a cabinet or other equipment, and at least 30 mm of wiring space above and below the drive. The manual gives procedures for configuration, jog operation, homing, triggering, parameter import/export, and RS485 communication testing. This manual is written in Chinese.
| Communication interface | RS485 |
|---|---|
| Communication protocol | Modbus RTU |
| Maximum controllable drives | 31 |
| Position table capacity | 16 segments |
| Supported closed-loop stepper motor frame sizes | 28, 35, 42, 57, 60, 86 |
| Maximum encoder cable length | 20 m |
| Minimum clearance from cabinet or other equipment | 10 mm |
| Wiring space above and below the drive | 30 mm |
It uses an RS485 communication interface based on the Modbus RTU protocol.
Up to 31 stepper drives can be controlled at the same time.
The drive supports closed-loop stepper motors with 28, 35, 42, 57, 60, and 86 frame sizes.
The encoder cable can be up to 20 m long.