Safety data sheet for Laird Tpcm 780SP, a solvent-diluted encapsulated product, covering hazards, composition, first aid, handling, storage and transport.
This safety data sheet, prepared in accordance with GB/T 16483 and GB/T 17519, describes Tpcm 780SP from Laird, a solvent-diluted encapsulated product supplied as a grey solid and liquid with a slight solvent odor. The document lists the manufacturer and distributor addresses in the United States, China and the United Kingdom, and states the recommended use as industrial use.
The sheet classifies the product as a category 3 flammable liquid, a category 3 skin irritant and a category 1 aspiration hazard, with the signal word Danger, and gives first aid, firefighting and spill measures. It also covers handling and storage, exposure controls and personal protective equipment, physical and chemical properties such as flash point 54.0 °C and auto-ignition temperature 343 °C, stability and reactivity, toxicological and ecological information, disposal, and transport data under UN1268, class 3, packing group III. This manual is written in Chinese.
| Appearance | Solid, liquid |
|---|---|
| Flash point | 54.0 °C (129.2 °F) (ASTM D-56) |
| Lower flammable limit | > 0.7 % |
| Upper flammable limit | < 5.4 % |
| Auto-ignition temperature | 343 °C (649.4 °F) |
| Bulk density | 2.1 - 2.48 g/cc at 25 °C |
| Volatile organic compound content | 5 - 10 % |
| Solubility in water | Negligible |
| Hazardous ingredient | Hydrotreated heavy naphtha (petroleum), CAS 64742-48-9, 0 - 7 % |
| UN number | UN1268 |
| Transport hazard class / packing group | Class 3, packing group III |
The sheet states that the recommended use is industrial use.
Call a doctor or poison control center immediately, rinse the mouth and do not induce vomiting.
A straight water stream must not be used for firefighting because it can spread the fire.
The product is shipped under UN1268, class 3, packing group III.