User manual for the Kramer VP-427A HDBaseT to HDMI+Audio receiver/scaler, covering connections, OSD operation, and technical specifications.
The Kramer VP-427A is an HDBaseT to HDMI+Audio receiver/scaler. It receives an HDBaseT signal and converts it to HDMI, IR and passed RS-232 signals, up- or down-scaling the picture to match the HDMI monitor. It has an HDBaseT input, HDMI output, bidirectional RS-232 port, IR input and output, analog audio output, and a system range of up to 70m (230ft).
This user manual covers getting started and safety, an overview and feature definitions, connecting the unit, RS-232 and IR control over HDBaseT, front panel and OSD operation, technical specifications, and supported input resolutions.
| HDBaseT input | 1 HDBaseT twisted pair on an RJ-45 connector |
|---|---|
| HDMI output | 1 HDMI connector |
| Analog audio output | 1 unbalanced stereo audio on a 3.5mm mini jack |
| Control port | 1 bidirectional RS-232 port on a 9-pin D-sub connector |
| System range | Up to 70m (230ft) |
| Latency | 30ms (approx.) |
| Output refresh rate | 60Hz for computer graphics resolutions, 50/60Hz for HDTV resolutions |
| Video color depth | Input: 8/10/12-bit, output: 8-bit |
| Embedded audio | LPCM 2CH |
| RS-232 baud rate | 115200bps max. |
| Power consumption | 5V DC, 1.5A |
| Operating temperature | 0° to +40°C (32° to 104°F) |
| Dimensions | 18.8cm x 11.4cm x 2.5cm (7.4” x 4.5” x 1.0”) W, D, H |
| Weight | 0.45kg (1.0lb) |
It is a receiver/scaler for HDBaseT twisted pair, HDMI, bidirectional RS-232, and IR signals.
Up to 70m (230ft).
LPCM 2CH.
Through the USB connector, which connects to a PC for programming upgrade.