Kramer K-Cam4K 4K PTZ Camera User Manual

Kramer K-Cam4K 4K PTZ Camera user manual: mounting, connections, RS-232 control, IR remote, OSD menu, Ethernet web pages, firmware upgrade and specs.


Kramer K-Cam4K 4K PTZ Camera User Manual - cover page
Brand
Kramer
Category
Other Electronics
Document type
User Manual
Language
English
Pages
37
File format
PDF
File size
1.6 MB
Published
11 November, 2026
Updated
11 November, 2026
MD5 checksum
18FB47F6B5CFBB512A22A90699D7F7A6

About this manual

This is the user manual for the Kramer K-Cam4K 4K PTZ Camera. It covers getting started and safety instructions, the camera's features and typical applications, the front and rear panel connectors, wall/ceiling mounting, and cabling the HDMI, 3G-SDI, USB 3.0, NET RJ-45, RS-232 and power connections.

The manual then explains how to operate and control the camera: from the infrared remote control transmitter, through the on-screen display (OSD) menu, over RS-232 using VISCA protocol, or over Ethernet with the built-in web pages where video, audio, general system and network settings are configured, device information is viewed and firmware is upgraded. It ends with technical specifications and default communication parameters.

What's inside

  • Introduction and Getting Started
  • Overview and Typical Applications
  • Defining K-Cam4K 4K PTZ Camera
  • Mounting K-Cam4K
  • Connecting K-Cam4K
  • Connecting to K-Cam4K via RS-232
  • Operating and Controlling K-Cam4K
  • Controlling Via IR Remote Control Transmitter
  • Operating via the OSD Menu
  • Operating via Ethernet and Using Embedded Web Pages

Specifications

Image sensor1/2.5 inch CMOS, max effective pixel 8.51M
Lens12x optical zoom, f = 4.4mm ~ 52.8mm, F1.8 ~ F2.6
Digital zoom16x
Horizontal rotation range±170°
Vertical rotation range±30°
Minimal illumination0.5 Lux @ (F1.8, AGC ON)
Video signal-to-noise ratio≥55dB
Horizontal angle of view71° ~ 8.2°
Number of presets255, preset accuracy 0.1°
RS-232 ports8-pin Mini DIN IN and OUT, max distance 30m, VISCA / Pelco-D / Pelco-P
Power savingLow-power sleep/wake-up, consuming as little as 400mW
Maximum mounting height2 meters

Frequently asked questions

How can I control the Kramer K-Cam4K?

It can be controlled by RS-232 serial commands (VISCA protocol) from a touch screen, PC or other serial controller, remotely from the infrared remote control transmitter, via the OSD menu, or via Ethernet using the built-in web pages.

Can the K-Cam4K be mounted upside down?

Yes. A built-in gravity sensor automatically corrects the image orientation, so the camera can be mounted straight or upside down.

How do I reset the camera to factory default parameters?

Press the RESET button for 5 seconds.

What is the maximum mounting height for the device?

The maximum mounting height for the device is 2 meters.

Download PDF (1.6 MB)

More Kramer Manuals


View all Kramer manuals →