Connection instructions for using KODAK PROFESSIONAL DCS Pro Back Plus shutter release cables with HASSELBLAD 553ELX, 503CXi and 503CW cameras.
This document explains how to connect shutter release cables between the KODAK PROFESSIONAL DCS Pro Back Plus and HASSELBLAD camera models 553ELX, 503CXi and 503CW. The DCS Pro Back Plus has a Remote Shutter Release connector on its right side, and besides the HASSELBLAD 555ELD it can be used with these three camera models when a custom cable assembly from Kodak is used.
Kodak created two custom cables, neither of which is included with the DCS Pro Back Plus: the 553ELX Cable Assembly (EK Cat Number 837 1205) and the 503CW/CXi Cable Assembly (EK Cat Number 195 3736). The 503CXi and 503CW cameras must be fitted with the HASSELBLAD Winder CW accessory. Step-by-step connection procedures for both cable assemblies are described, along with how to capture images using the Shutter Release button on the cable.
| 553ELX Cable Assembly catalog number | EK Cat Number 837 1205 |
|---|---|
| 503CW/CXi Cable Assembly catalog number | EK Cat Number 195 3736 |
| Compatible HASSELBLAD camera models | 555ELD, 553ELX, 503CXi, 503CW |
In addition to the HASSELBLAD 555ELD, it can be used with the HASSELBLAD 503CXi, 503CW and 553ELX, using a custom cable assembly available from Kodak.
Yes, both cameras must be outfitted with the HASSELBLAD accessory Winder CW, which must be attached before connecting the cable.
Use the Shutter Release button on the custom cable assembly. Do not use the shutter release on the camera body, the Winder CW, or the Winder CW IR Remote Control unit.
In C (continuous exposure) mode the longest shutter speed available is 1/8 second, which is a limitation of the Winder CW.