Service manual for the Icom IC-9700 VHF/UHF all mode transceiver, covering specifications, adjustments, parts, and diagrams.
This service manual covers the Icom IC-9700 VHF/UHF all mode transceiver. It includes specifications, inside views, interface information, adjustment procedures, parts lists, board layouts, wiring diagrams, block diagrams, and schematic diagrams.
The manual also contains service cautions, repair notes, ordering parts information, and distributor addresses. Specifications are listed for multiple versions, including USA, EUR, ITA, TPE, KOR, and EXP.
| Power supply voltage | 13.8 V DC ±15% |
|---|---|
| Polarity | Negative ground |
| Antenna impedance | 50 Ω |
| Operating temperature range | −10°C to +60°C |
| Frequency stability | ±0.5 ppm |
| Frequency resolution | Minimum 1 Hz |
| Dimensions | 240 (W) × 94 (H) × 238 (D) mm |
| Weight | 4.7 kg (10 lb 6 oz) |
| Transmitter output power (144 MHz band, SSB/CW/FM/RTTY/DV) | 0.5 ~ 100 W |
| Microphone impedance | 600 Ω |
| Audio output power | More than 2.0 W |
| Audio output impedance | 8 Ω |
| RIT variable range | ±9.999 kHz |
| Carrier suppression | More than 50 dB |
| Unwanted sideband suppression | More than 50 dB |
| Operating mode | A1A, A3E, J3E, F1B, F1D, F2D, F3E, F7W |
| Memory channels | 107 (99 simplexes + 6 program scan edges + 2 calls) ×3 bands |
| Stand-by power consumption | 1.2 A (typical) |
| Maximum audio power consumption | Less than 1.8 A |
| Transmit power consumption (high power) | Less than 18 A |
| Receive system (144/430 MHz bands) | RF direct sampling |
| Receive system (1200 MHz band) | Down conversion IF sampling |
| Sensitivity (SSB/CW, preamp and IP+ on) | Less than −19 dBμV (0.11 μV) |
| Selectivity (SSB) | More than 2.4 kHz/–3 dB, less than 3.6 kHz/–60 dB |
| Spurious and image rejection ratio (SSB/CW, 144/430 MHz bands) | More than 70 dB |
| ANF attenuation | More than 30 dB |
| MNF attenuation | More than 70 dB |
| NR attenuation | More than 6 dB |
13.8 V DC ±15%.
50 Ω.
−10°C to +60°C.
8 Ω.