HighPoint SSD7103 & SSD7202 Data RAID Installation Guide (Linux)

Guide for installing, updating and troubleshooting HighPoint SSD7103 and SSD7202 NVMe RAID controllers on Linux systems.

Brand: HighPoint
Document type: Installation Guide
Language: English
Pages: 20
File format: PDF
File size: 1.1 MB
Published: 28 September, 2026
Updated: 28 September, 2026
MD5 checksum: 14B97E65922E4843C9D8BF5FBBDF8E77
PDF: HighPoint SSD7103 & SSD7202 Data RAID Installation Guide (Linux) PDF

About this manual

This guide covers hardware and software prerequisites, UEFI BIOS configuration, driver and management software installation, updates, and removal procedures for the HighPoint SSD7103 and SSD7202 data RAID controllers. It also provides detailed troubleshooting steps and information on collecting logs for support.

The document includes step‑by‑step commands for verifying controller detection, compiling drivers, and configuring the system BIOS, as well as instructions for using the HighPoint RAID WebGUI and CLI tools.

What's inside

Overview
Prerequisites for Data RAID Configuration
UEFI BIOS Settings
Driver Installation
Installation
Update
Uninstall
Troubleshooting
Appendix

Specifications

PCIe Interface	PCIe 3.0 x8 or x16 slot
Supported SSD	NVMe SSD (at least one required)
BIOS Requirement	UEFI BIOS with optional ROM support
Secure Boot	Must be disabled

Frequently asked questions

What BIOS settings are required for the SSD7103/SSD7202 RAID controller?

The motherboard must use UEFI BIOS, the PCIe slot OPROM must be set to EFI, and Secure Boot must be disabled.

How can I verify that the SSD7103/SSD7202 controller is detected in Linux?

Open a terminal with root privileges and run commands such as lspci, fdisk -l, and dmesg | grep nvme to check for the controller and attached SSDs.

Download PDF (1.1 MB)