Owner's manual and safety instructions for the Harbor Freight item 56733 transfer pump, covering setup, battery or adapter power, LED modes and specs.
This is the Owner's Manual & Safety Instructions for the Harbor Freight Tools item 56733 transfer pump. It opens with safety warnings for a pump that is rated for water only, including grounding and GFCI requirements, battery pack and charger safety, and lithium battery warnings. A specifications table lists the battery rating, power adapter input and output ratings, maximum flow, maximum head lift and discharge port size.
The manual then describes the pump's parts and functions, installation of the pump with a fixed pipeline or flexible hose, and connection either to a 120VAC power adapter or to a fully charged Bauer 20V Li-ion battery pack. Installation and operating instructions explain hose connection, priming with two drops of priming oil, outlet checks, and the meaning of the red LED indicator modes (on, flashing, dimly lit, pulsing). Areas of use and restrictions are also listed.
| Battery Rating | Bauer 20V Li-ion (sold separately) |
|---|---|
| Adapter Input Rating | 120VAC / 50/60Hz / 3.5A |
| Adapter Output Rating | 18VDC / 8.3A |
| Maximum Flow at 0 ft | 325 GPH |
| Maximum Head Lift at 0 Flow | 45 ft |
| Discharge Port | 3/4 in Garden Hose Thread |
| Maximum Water Temperature | 95°F (35°C) |
It is designed for water only, with a maximum temperature of 95°F (35°C). It must not be used with fuels, cleaning fluids or other chemical products.
A Bauer 20V Li-ion battery pack, which is sold separately. The pack is inserted into the back of the pump under the back cover.
The voltage is low, so all connections should be checked, or the pump has run dry and the intake filter should be moved to deeper water.
Two drops of priming oil go into the Intake Port before starting the pump.