Owner's manual and safety instructions for Harbor Freight 58395 (48 in) and 58448 (60 in) farm jacks, covering setup, lifting, lowering, winching and parts.
This is the Owner's Manual & Safety Instructions for the Harbor Freight Tools 58395 and 58448 farm jacks, referred to in the text as a Trail Jack. Model 58395 is the 48″ jack and model 58448 is the 60″ jack. The document contains warning symbols and definitions, a long list of important safety information, a specifications table, and step-by-step operating instructions for lifting and lowering a load.
The manual also explains how to use the jack as a clamp and for winching, gives before-use inspection and lubrication procedures, and ends with a parts list and diagram plus a place to record the product's serial number. It notes that rated load is 5,000 lb., and that jack stands of appropriate capacity (not included) must be placed under the vehicle once it is raised.
| Models covered | 58395 and 58448 |
|---|---|
| Height | 48″ (58395); 60″ (58448) |
| Minimum Lift Height | 4-1/2″ (both models) |
| Maximum Lift Height | 41″ (58395); 53″ (58448) |
| Rated Load (58395) | 5,000 lb. |
| Rated Load (58448) | 5,000 lb. at 4.5″ - 41″; 3,300 lb. at 41″ - 53″ |
| Minimum load for lowering with handle movement | 150 lb or more |
Model 58395 is rated at 5,000 lb. Model 58448 is rated at 5,000 lb. from 4.5″ to 41″ and 3,300 lb. from 41″ to 53″.
Set the Reversing Latch to the DOWN position with the handle in full upright position, then pull the handle down to the bottom of its stroke and raise it to the top repeatedly to lower the vehicle.
Lubricate the moving parts of the jack with lubricating oil; motor oil or grease should not be used.
Attach one end of a chain or tow strap to the object and the other end to the top Clamp-Clevis, then attach a second strap between a fixed object and the Large Runner.