Hailin T51 series electric thermal actuator technical specifications and instructions for HVAC valve control.
Hailin T51 series electric thermal actuators are heat-actuated switching valve actuators used to open or close heating or cooling system pipes for room temperature control. They mount on hot or cold water valves and use a thermal (electric wax) structure to control valve position.
The document covers product features, working principle, initial opening function, stroke indication, split installation, model variants, technical specifications, characteristic curves, and installation and wiring instructions. This manual is written in Chinese.
| Voltage (T51V220) | AC220V±10% |
|---|---|
| Voltage (T51V24) | AC24V±10% |
| Peak current (T51V220) | 300mA |
| Peak current (T51V24) | 250mA |
| Power consumption | 2W |
| Running time | about 3 minutes |
| Stroke | 4mm |
| Torque | 100N±5% |
| Fluid temperature | 0-100°C |
| Ambient temperature | 0-60°C |
| Protection rating | IP54 |
| CE standard | EN60730 |
| Housing / color | Nylon / gray |
| Weight | 100g |
| Cable | 2 x 0.75mm PVC, gray / 1 m |
| Wire cross-section | 1.5mm |
For normally closed units, the initial state stays open to ease installation; after the first power-on for about 6 minutes, it automatically ends and the actuator remains normally closed.
The adapter is first installed on the valve, then the actuator is fixed to the adapter by hand without tools.
Vertical or horizontal installation is recommended; downward installation is not recommended because it reduces valve service life.
The actuator has an IP54 protection rating.