A gate valve is a sluice gate. The movement direction of the sluice gate is perpendicular to the flow direction. The gate valve can only be fully open and fully closed, and cannot be adjusted and throttled. The gate valve seals the valve seat and the sluice gate by contact. The sealing surface is usually welded with metal materials to increase wear resistance.
This Chinese-language instruction manual from Hailin (北京海林节能科技股份有限公司 / 北京海林自控科技股份有限公司) covers gate valves used to open and close the medium in a pipeline. It explains that the gate moves perpendicular to the flow and that the valve is only for full open and full close, not for regulating or throttling, and it lists applications such as domestic water, water supply and drainage, sewage treatment, HVAC, and chemical fluid transport.
The manual gives the model naming rules, dimension tables and part materials for brass, ductile iron and cast iron gate valves, and the technical parameters of the SZF series brass manual gate valve (DN15–DN50, PN16, medium temperature -20 to 100 °C). Installation and use instructions cover checking the rated parameters, cleaning the piping before installation, trained installers, and restrictions on media containing grease, mineral oil or corrosive substances. This manual is written in Chinese.
| Nominal diameter (SZF series) | DN15–DN50 |
|---|---|
| Nominal pressure | PN16 |
| Closing pressure | 1.6 MPa |
| Leakage | Not more than 550 bubbles per minute |
| Applicable medium | Water and glycol water solution up to 60% |
| Medium temperature | -20 to 100 °C (liquid) |
| Standard | GB/T8464-2008 |
| Body material | Brass, ductile iron |
| Gasket material | EPDM, PTFE |
Turn the handwheel clockwise and the gate descends until it fully cuts off the passage, closing the valve; turn it counterclockwise and the gate rises until the valve is fully open.
No. The valve is only for full open and full close and cannot be used for regulating or throttling.
From -20 to 100 °C in liquid form.
The piping system must be thoroughly cleaned, if necessary with chemical agents, so that it is free of rust and dirt, and all filter devices should be removed before flushing.