User manual for the GYS GYSFLASH 30.12 PL battery charger for 12 V lead-acid and LFP batteries.
GYSFLASH 30.12 PL is a GYS battery charger for most 12 V lead-acid batteries (gel, AGM, liquid) and 12 V LFP/LiFePO4 batteries. It supports lead-acid capacities from 15 Ah to 375 Ah and LFP capacities from 8 Ah to 375 Ah, with selectable charging currents of 7 A, 15 A, or 30 A.
The charger provides lead-acid, lithium, showroom, and power-supply modes, with automatic temperature compensation and protection against short circuits and reversed polarity. Its technical data include 220-240 VAC input, 500 W rated power, 12 VDC output, operating temperature from -20 C to +40 C, and dimensions of 190 x 190 x 73 mm. This manual is written in Chinese.
| Rated supply voltage | 220-240 VAC, 50/60 Hz |
|---|---|
| Rated power | 500 W |
| Rated output voltage | 12 VDC |
| Rated output current | 7 A / 15 A / 30 A |
| Rated battery capacity | 7-375 Ah |
| Supported 12 V lead-acid battery capacity | 15-375 Ah |
| Supported 12 V LFP battery capacity | 8-375 Ah |
| Lead-acid charging mode | 14.6 V, up to 30 A |
| Lithium charging mode | 14.4 V, up to 30 A |
| Showroom mode | 13.7 V, up to 30 A |
| Power supply option | 13.7 V, up to 30 A |
| Idle battery consumption | <0.5 mA |
| Ripple | <150 mV rms |
| Charging curve | IUOU |
| Operating temperature | -20 C to +40 C |
| Storage temperature | -20 C to +80 C |
| Protection rating | IP 43 / IP 41 |
| Protection class | Class I |
| Noise level | <55 dB |
| Weight | 1.85 kg |
| Dimensions | 190 x 190 x 73 mm |
| Model reference | 029668 |
It charges most 12 V lead-acid batteries (gel, AGM, liquid) and 12 V LFP/LiFePO4 batteries.
Connect the charger to the battery, then to the mains, select the mode and charging current; charging starts automatically after about 5 seconds.
The indicator stays on when the battery is fully charged; it flashes when the battery is ready to start the engine.
Check that the charging clamps are connected correctly and that the battery is 12 V.
The warranty covers defects or manufacturing defects (parts and labor) for 2 years from purchase.