Graco TapeLazer HP Automatic 20A024/20A140 operation manual for applying traffic marking inserts, covering safety, setup, adjustment, operation and maintenance.
The Graco TapeLazer HP Automatic 20A024/20A140 is equipment for applying traffic marking inserts on roads and sidewalks. It is for professional use and outdoor use only, and must not be used in explosive or hazardous classified areas. Its maximum working pressure is 145 psi (1.0 MPa, 10.0 bar).
This Chinese operation manual covers safety warnings, component identification, setup and startup, pressure relief, initial setup, tape and roller setup, tape loading, roller and scraper guard adjustment, carriage and caster adjustment, handlebar adjustment, engine starting, operation, maintenance, troubleshooting, parts, air line schematic, wiring diagram, technical specifications and warranty information. This manual is written in Chinese.
| Maximum working pressure | 145 psi (1.0 MPa, 10.0 bar) |
|---|---|
| Models | 20A024, 20A140 |
| Intended use | Applying traffic marking inserts on roads and sidewalks |
| Use environment | Outdoor use only; not for explosive or hazardous classified areas |
| Model 20A140 configuration | TapeLazer HP Automatic with LazerGuide 3000 |
| Engine oil | SAE 10W-30 in summer or 5W-30 in winter |
| Compressor oil | Synthetic air compressor oil only |
The maximum working pressure is 145 psi (1.0 MPa, 10.0 bar).
It is used for applying traffic marking inserts on roads and sidewalks.
Use SAE 10W-30 in summer or 5W-30 in winter.
The compressor requires synthetic air compressor oil only.