GORE-SHIELD GS2100 EMI gasket summary: construction, thickness options, material and electrical properties, and military, space and ASTM standards.
This two-page GORE-SHIELD GS2100 summary from W. L. Gore & Associates describes a conductive, adhesive-backed EMI gasketing material that is approved for spaceflight and military applications. The gasket consists of a carbon-filled cellular PTFE matrix, a conductive pressure sensitive adhesive and a PET carrier film, and is supplied either as die-cut parts or as slit width rolls for manual "peel and stick" use. Listed applications include EMI shielding for wireless infrastructure and microwave equipment, high frequency cable connectors, telecommunications equipment and high frequency portable electronic devices.
The document gives design considerations for housing and gasket selection, thickness options from 0.010 in (0.25 mm) to 0.080 in (2.03 mm), RoHS status, and nominal material and electrical properties such as Shore A hardness 45, density 0.34 g/cc, UL-94 V-0 rating and shielding effectiveness greater than 45 dB at 1 GHz with adhesive. A second table lists performance against military, European Space Agency, British and ASTM specifications and standards, together with a load and shielding effectiveness versus percent compression graph.
| Hardness | Shore A 45 |
|---|---|
| Density | 0.34 g/cc |
| Fire safety rating | UL-94 V-0 |
| Volume resistivity | 1.5 ohm-cm @ 500 psi, Ag electrodes |
| Shielding effectiveness (with adhesive) | >45 dB @ 1 GHz (ARP 1705 Method) |
| Nominal thickness options | 0.010 in (0.25 mm) to 0.080 in (2.03 mm) |
| Operating temperature range without adhesive | -200°C to +200°C |
| Operating temperature range with adhesive | -40°C to +95°C |
| Outgassing | Pass (<1% mass loss) |
| Water seal | Pass, DEF STAN 59-103/Part 3 and IP 65 |
It consists of a carbon-filled cellular PTFE matrix, a conductive pressure sensitive adhesive and a PET carrier film.
EMI shielding for wireless infrastructure and microwave equipment, high frequency cable connectors, telecommunications equipment and high frequency portable electronic devices.
Without adhesive it is rated for -200°C to +200°C; with adhesive the range is -40°C to +95°C.
Yes, it is listed as flame retardant with a UL-94 V-0 rating.