Ezviz CS-HAL-SW63 smart curtain motor user manual with installation, wiring, safety and configuration instructions.
This manual provides detailed installation and wiring instructions for the Ezviz CS-HAL-SW63 smart curtain motor, including required tools, mounting steps, and connection of the neutral and line wires. It also explains how to configure the device using the Ezviz Cloud Video app and bind it to the Ezviz smart gateway.
Safety guidelines, technical specifications, and device operation details such as indicator light behavior and reset procedure are included to ensure proper and safe use of the indoor-only motor. This manual is written in Chinese.
| Dimensions | 86 × 86 × 35 mm |
|---|---|
| Rated Voltage | 220 V AC |
| Communication | ZigBee 3.0 |
| Maximum Relative Humidity | ≤95 % RH, no condensation |
Press the RESET hole with the card needle for about 2 seconds until the white light flashes continuously, which restores factory settings.
Use the “Ezviz Cloud Video” client to complete binding with the Ezviz smart gateway and add the curtain motor.
No, the motor is for indoor use only and must not be installed in wet, polluted, or corrosive environments such as bathrooms.
Connect the neutral line to N, the line (fire) to L, and then wire the motor’s forward and reverse lines to the appropriate L1‑L4 terminals as described.