Setup guide for installing and connecting the Extron IP A T RL Y4 four-relay accessory.
The Extron IP A T RL Y4 is an IPLink accessory with four output relays, each with normally open and normally closed contacts. It converts a solid-state signal of up to 12 VDC into a relay contact closure for devices such as lighting systems or remote screens.
This guide covers installation, input and output connections, wiring diagrams for controllers and screen controllers, and relay operation. The relay contacts can handle up to 24 V AC or 24 VDC and are protected by an overvoltage circuit.
| Number of output relays | 4 |
|---|---|
| Input signal voltage | Up to 12 VDC |
| Relay contact rating | Up to 24 V AC or 24 VDC |
| Input connector | 5-pole captive screw |
| Output connectors | Four 3-pole captive screw |
| Reverse bias protection diode | 1N4001 or equivalent |
| Diode current rating | 100 mA maximum |
| Diode reverse bias rating | 50 V maximum |
It has four output relays, each with normally open and normally closed contacts.
It converts a solid-state signal of up to 12 VDC into a relay contact closure.
The relay contacts can handle up to 24 V AC or 24 VDC.
Use a 1N4001 or equivalent diode.