User manual for the ETCR6000 DC/AC clamp leakage current meter, covering specifications, zeroing, testing, data storage, RS232 upload, and battery replacement.
The ETCR6000 is a DC/AC clamp leakage current meter designed for online measurement of DC and AC leakage current and current on circuits up to 600 V. It uses clamp CT non-contact measurement with a thin, long jaw, and the manual lists applications including power metering systems, high-speed rail systems, and automotive circuit inspection.
The manual covers warning information, electrical symbols, technical specifications, meter structure, LCD display, operation, battery replacement, and the packing list. Operation includes power on/off, zero adjustment, testing, data hold and storage, review and clearing, and uploading stored data to a computer through the RS232 interface. This manual is written in Chinese.
| Function | AC/DC leakage current and current measurement |
|---|---|
| Power | Zinc-manganese dry battery 6F22 9V; continuous use 100 hours |
| Range | 0 mA to 60.0 A AC/DC |
| Resolution | 1 mA AC/DC |
| Accuracy | ±2% rdg ±5 dgt at 23°C ±5°C, 75% RH or less |
| Display | 4-digit LCD |
| Jaw size | φ7 mm clampable conductor outer diameter |
| Dimensions | 168 mm × 65 mm × 34 mm (H × W × D) |
| Frequency response | AC: 45 Hz to 400 Hz |
| Data storage | 99 sets |
| RS232 interface | RS232 interface; stored data can be uploaded to a computer for saving and printing |
| Communication parameters | Baud rate 9600, data bits 8, stop bits 1, parity NONE |
| Operating temperature and humidity | -10°C to 50°C; 80% RH or less |
| Storage temperature and humidity | -10°C to 60°C; 70% RH or less |
| Insulation strength | AC 3700 V/rms between core and case |
| Safety standard | IEC1010-1, IEC1010-2-032, pollution degree 2, CAT III (600V) |
| Weight | 180 g including battery |
Clamp both the positive and negative DC wires together; this measures DC leakage current.
Select the AC or DC range, adjust the ZERO knob until the meter reads zero, then perform the test.
The meter can store 99 sets of data; when full, it flashes the FULL symbol.
Connect the meter to a computer with the RS232 communication cable, power on the meter, and run the monitoring software; after a successful connection, stored historical data can be read and uploaded.