DREHMO i-matic Electric Actuator Assembly, Operation and Servicing Instructions

Assembly, operation and servicing instructions for the DREHMO i-matic electric actuator with integral controls, covering mounting, wiring and commissioning.


DREHMO i-matic Electric Actuator Assembly, Operation and Servicing Instructions - cover page
Brand
Drehmo
Category
Automation control Equipment
Document type
User Manual
Language
English
Pages
60
File format
PDF
File size
844 KB
Published
10 November, 2026
Updated
10 November, 2026
MD5 checksum
127A858025EA4A8ADED40BCD9E9387F9

About this manual

The DREHMO i-matic is an electric actuator with integral controls for multi-turn, part-turn, and linear actuators. This manual, part number 383899, covers assembly, operation, and servicing, including safety instructions, identification, transport and storage, mounting to a valve, electrical connection, local controls, commissioning, maintenance, and technical data.

It describes the version with i-matic or i-maticC controls in the actuator type code and notes that the additional description of the integrated control unit for electric type IM (383347) or IMC (383352) must also be observed. The document applies to the clockwise-closing standard version, in which the driven shaft turns clockwise to close the valve.

What's inside

  • Safety instructions
  • Identification
  • Transport, storage and packaging
  • Mounting to valve
  • Electrical connection
  • Local controls
  • Commissioning
  • Servicing and maintenance
  • Technical data
  • External warnings

Specifications

Enclosure protection (standard)IP67 according to IEC/EN 60529
Enclosure protection (option)IP68 (available as option)
Type of duty (open-close operation)S2, <15 min
Type of duty (modulating actuator)S4, max. 35% ED
Nominal torque (multi-turn actuators)30 to 2000 Nm
Nominal torque (part-turn actuators)30 to 1800 Nm

Frequently asked questions

What is the standard enclosure protection of the DREHMO i-matic actuator?

The standard version has IP67 enclosure protection in compliance with IEC/EN 60529 and is suitable for outdoor installation.

What should be checked before working on a hot actuator?

During operation, surface temperatures may exceed 60 °C; the manual recommends checking the surface temperature with a thermometer and wearing protective gloves if required.

Which applications are not permitted for DREHMO actuators?

The manual lists industrial trucks, lifting appliances, passenger and service lifts, escalators, continuous duty, buried service, continuous submersion, and potentially explosive areas as not permitted.

What is the nominal torque range for DREHMO multi-turn actuators?

For multi-turn actuators, nominal torque ranges from 30 to 2000 Nm.

Download PDF (844 KB)

More Drehmo Manuals


View all Drehmo manuals →