DrayTek VigorSwitch PQ2200xb quick start guide for setup, hardware connection, software configuration, safety, and warranty.
This quick start guide is for the DrayTek VigorSwitch PQ2200xb, an L2+ managed switch with PoE. It describes product installation, hardware connection, software configuration, safety instructions, warranty, and compliance information.
The guide also includes package contents, LED status explanation, interface description, hardware installation, rack-mount installation, software configuration, customer service, and GPL notice. It notes the firmware version and directs users to the DrayTek web site for future updates. This manual is written in Chinese.
| PoE power budget | 400 Watts (Max) |
|---|---|
| IEEE 802.3af output | 15.4W |
| IEEE 802.3at output | 30W |
| IEEE 802.3bt output | 90W |
| AC input | 100~240V/AC, 50/60Hz |
| Ethernet speed | 10/100/1000/2500Mbps |
| SFP+ connection speed | 10Gbps |
Read the installation guide thoroughly before you set up the switch. The switch is a complicated electronic unit that may be repaired only by authorized and qualified personnel.
The default IP address is 192.168.1.224, the subnet mask is 255.255.255.0, DHCP Client is enabled, and the username and password are admin.
The switch supports IEEE 802.3af, at, and bt, with maximum outputs of 15.4W, 30W, and 90W. The PoE power budget is 400 Watts.