This manual covers the installation, operation, maintenance, and safety precautions for the DeVilbiss PlusTM suction and pressure feed spray guns.
The DeVilbiss PlusTM spray gun is a general-purpose, heavy-duty, high-production tool suitable for use with most types of materials, available in suction feed or pressure feed versions. It includes 400 series stainless steel fluid tips and needles and is designed for mildly corrosive and non-abrasive materials. For maximum transfer efficiency, the gun should be connected to a clean, moisture, and oil-free air supply using a hose with an internal diameter of at least 5/16". Excess pressure should be avoided to prevent overspray and reduce efficiency.
| Transfer Efficiency | exceed 65% |
|---|---|
| Recommended Air Hose I.D. | at least 5/16" |
| Recommended Inlet Pressure | 40 psi |
| Fluid Tip Torque | 15-20 ft.-lbs |
The guns should not be used with chlorinated solvent materials.
A hose size of at least 5/16" I.D. is recommended for maximum transfer efficiency.
The recommended inlet pressure is 40 psi, though some materials can be sprayed at lower pressures.