Dell 5100MP projector owner's manual covering setup, connections, on-screen menus, troubleshooting, specifications, and regulatory notices.
This owner's manual is for the Dell 5100MP projector. It describes package contents, projector controls and connectors, and how to connect computers, DVD players, and other sources. It also covers on-screen display menus, image and audio settings, network settings, troubleshooting, lamp replacement, specifications, contacting Dell, and regulatory notices.
The manual includes specifications such as 3300 ANSI lumens brightness, 2500:1 contrast ratio, 1400 x 1050 resolution, and a 300-watt lamp rated for 1700 hours, or up to 2200 hours in eco mode.
| Light valve | Single-chip 0.95-inch SXGA+ DLP LVDS technology |
|---|---|
| Brightness | 3300 ANSI lumens (maximum) |
| Contrast ratio | 2500:1 typical (full on/full off) |
| Uniformity | 80% typical (Japan Standard - JBMA) |
| Lamp | 300-watt user-replaceable 1700-hour lamp (up to 2200 hours in eco mode) |
| Number of pixels | 1400 x 1050 (SXGA+) |
| Displayable color | 16.7 million colors |
| Color wheel speed | 100-127.5 Hz (2X) |
| Projection lens | F/2.6-2.87, f=39.1-46.92 mm with 1.2x manual zoom |
| Projection screen size | 30.8-295.3 inches (diagonal) |
| Projection distance | 4.9-39.4 ft (1.5-12 m) |
| Video compatibility | NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, SECAM, HDTV (1080i/p, 720p, 576i/p, 480i/p); composite, component, and S-video |
| Horizontal frequency | 15-100 kHz (analog), 30-64 kHz (digital) |
| Vertical frequency | 43-120 Hz (analog), 43-85 Hz (digital) |
| Power supply | Universal 90-240 V AC, 50-60 Hz with PFC input |
| Power consumption | 400 watts typical, 335 watts in eco mode |
| Audio | 2 speakers, 2 watts RMS |
| Noise level | 37 dB(A) full-on mode, 31 dB(A) eco mode |
| Weight | 8.2 lbs (3.73 kg) |
| Dimensions (W x H x D) | 13 x 10.3 x 4.5 ±0.04 in (329.8 x 261.4 x 115.2 ±1 mm) |
| Environmental | Operating 5-35°C (41-95°F), 80% humidity maximum; storage -20 to 60°C (-4 to 140°F), 80% humidity maximum |
| Regulatory | FCC, CE, VCCI, UL, cUL, TÜV-GS, ICES-003, C-Tick, GOST, PCBC, CCC, PSB, EZU, NOM, S-TÜV/Argentina |
| Networking protocol | 10/100 Base-T TCP/IP, ICMP, ARP, SNMP v1.0, SMTP, DHCP, HTTP |
| I/O connectors | AC power input; M1-DA, 15-pin D-sub, and BNC RGB computer inputs; 15-pin D-sub output; 3 RCA component, S-video, and composite video; audio input/output; 12 V DC relay; RJ45; HDMI; mini-DIN RS232 |
| RS232 connection settings | Baud rate 19200, 8 data bits, no parity, 1 stop bit |
The projector has a brightness of 3300 ANSI lumens maximum.
The 300-watt user-replaceable lamp is rated for 1700 hours, or up to 2200 hours in eco mode.
The projector has 1400 x 1050 pixels (SXGA+).
It uses a universal 90-240 V AC, 50-60 Hz power supply with PFC input.