Operating guide for the Danfoss VLT AQUA Drive FC 202 frequency converter covering safety, mechanical and electrical installation, commissioning…
This operating guide from Danfoss provides instructions for the safe installation and commissioning of the VLT AQUA Drive FC 202 frequency converter in the 110–400 kW range. It is written for qualified personnel and covers the product overview, safety precautions, mechanical and electrical installation, commissioning via the LCP control panel, application setting examples, and maintenance and diagnostics.
The guide also includes specifications for 3x380–480 V AC and 3x525–690 V AC mains supplies, fuse and cable requirements, ratings, weights and dimensions, plus a list of warnings and alarms with troubleshooting steps. Document version MG21A443 corresponds to software version 2.6x. This manual is written in Chinese.
| Power range | 110–400 kW |
|---|---|
| Mains supply (low) | 3x380–480 V AC |
| Mains supply (high) | 3x525–690 V AC |
| Leakage current | Higher than 3.5 mA |
| Minimum discharge wait time | 20 minutes |
| Maximum output frequency (software 1.99+) | 590 Hz |
| Software version | 2.6x |
Wait at least 20 minutes for the DC-link capacitors to fully discharge, then verify with an appropriate voltage measuring device that no voltage remains.
Only qualified personnel and and trained staff familiar with the instructions and safety measures in this guide may install, commission and maintain the equipment.
From software version 1.99 onwards, the output frequency of the frequency converter is limited to 590 Hz.
No. Equipment containing electrical components must not be disposed of with household waste and must be collected separately according to local regulations.