Danfoss ETS 12.5 - ETS 400 Electric Expansion Valve Data Sheet

Danfoss ETS 12.5 to ETS 400 electric expansion valve data sheet with technical data, capacities, wiring and accessories.


Danfoss ETS 12.5 - ETS 400 Electric Expansion Valve Data Sheet - cover page
Brand
Danfoss
Category
Other Electronics
Document type
Datasheet
Language
English
Pages
18
File format
PDF
File size
2.6 MB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
9410B49AB5AC5E1202A3E5CEEF834867

About this manual

This data sheet describes the Danfoss ETS series of electric expansion valves for precise liquid injection in evaporators used in air conditioning and refrigeration applications. It covers features, technical data, valve construction, stepper motor switch sequence, wiring, and application with controllers and drivers.

The document lists rated capacities and code numbers for ETS 12.5, ETS 25, ETS 50, ETS 100, ETS 250 and ETS 400 valves, including R744 (CO2) versions, plus M12 connector cable accessories with jacket, insulation and length specifications.

What's inside

  • Features
  • Technical data
  • Compatible refrigerants
  • Material of construction
  • Stepper motor switch sequence
  • Electrical wiring
  • Valve application
  • Rated capacity and code numbers
  • Accessories and cable specification

Specifications

Compatible refrigerantsR410A, R407C, R404A, R507, R134a, R22, R1234ze; special valves for R744 (CO2)
Max. working pressure (PS/MWP)ETS 12.5, ETS 25, ETS 50, ETS 100: 45.5 bar / 660 psig; ETS 250, ETS 400: 34 bar / 493 psig
Refrigerant temperature range-40 °C to 65 °C (-40 °F to 149 °F)
Ambient temperature-40 °C to 60 °C (-40 °F to 140 °F)
Motor enclosureIP67
Stepper motor typeBi-polar - permanent magnet
Phase resistance52 Ω ±10%
Phase inductance85 mH
Step angle7.5° (motor), 0.9° (lead screw)
Nominal voltageConstant voltage drive: 12 V dc -4% to 15%, 150 steps/sec
Phase currentUsing chopper drive: 100 mA RMS -4% to 15%
Max. total powerVoltage / current drive: 5.5 / 1.3 W (UL: NEC class 2)
Step rateConstant voltage drive: 150 steps/sec; chopper current drive: 0 - 300 steps/sec, 300 recommended
Total stepsETS 12.5, ETS 25, ETS 50: 2625 steps; ETS 100: 3530 steps; ETS 250, ETS 400: 3810 steps
Full travel timeETS 12.5, ETS 25, ETS 50: 17 / 8.5 sec.; ETS 100: 23 / 11.5 sec.; ETS 250, ETS 400: 25.4 / 12.7 sec. (voltage / current)
Lifting heightETS 12.5, ETS 25, ETS 50: 13 mm; ETS 100: 16 mm; ETS 250, ETS 400: 17.2 mm
Electrical connectionM12 connector
Compatible Danfoss controllersEKC 312, EKC 316A, EKD 316, EKD 316C and EXD 316
Maximum cable length (Danfoss controllers)5 m / 15 feet for EKC 316A and EKC 312; 50 m / 150 feet for EKD 316
Cable outer diameterSpecial PVC cables: 5.0 mm (0.2 in.); CPE cables: 6.3 mm (0.25 in.)

Frequently asked questions

Which controllers are compatible with the Danfoss ETS electric expansion valve?

Compatible Danfoss controllers include EKC 312, EKC 316A, EKD 316, EKD 316C and EXD 316. The valve can also be driven by electronic control solutions from other manufacturers.

What happens to the ETS valve position during a power failure?

The ETS valve remains in the opening position it had at the moment of power failure unless a battery backup safety device is installed.

Which ETS models have a built-in sight glass with moisture indicator?

ETS 50 through ETS 400 are designed with a built-in sight glass with moisture indicator, while ETS 12.5 and ETS 25 do not feature a sight glass.

What drive voltage and current does the ETS valve require?

Operating the ETS series requires a controller with either 12 V DC voltage drive (5.5 W) or chopper current drive (100 mA RMS).

Download PDF (2.6 MB)

More Danfoss Manuals


View all Danfoss manuals →