Installation guide for the Danfoss ERC 213, an intelligent integrated digital cooling and defrost controller with three relays for commercial refrigeration.
The ERC 213 is an intelligent, multifunction integrated cooling controller from Danfoss with temperature and defrost control, supplied with three relays. It is designed for operating-temperature control with a sensor and is intended for commercial refrigeration and heating plants. The guide covers mounting, electrical connections, quick configuration at startup, menu structure, basic operation, predefined applications and the parameter list.
The controller provides user-friendly operation through four buttons, a simple menu structure and preinstalled application solutions. High-power 16 A relays allow direct connection of heavy loads, special software functions protect the unit, and demand-controlled defrost, day/night mode and intelligent evaporator fan control support energy efficiency. Technical data, approvals and a full parameter list are also included.
| Power supply | 115 V AC / 230 V AC 60/50 Hz |
|---|---|
| Power consumption | Less than 0.7 W |
| Measurement range | -40 – 105 °C (-40 – 221 °F) |
| Supported sensor types | NTC 5 K, NTC 10 K, PTC, Pt1000 |
| Compressor relay DO1 | 16 A, 16 (16) A, EN 60730-1 |
| Defrost relay DO2 | 8 A, 2 FLA / 12 LRA, UL60730-1 |
| Fan relay DO3 | 3 A, 2 FLA / 12 LRA, UL60730-1 |
| Display | LED display, 3 digits, °C and °F scale |
| Operating conditions | -10 – 55 °C (14 – 131 °F), 90% Rh |
| Front protection rating | IP65 (gasket integrated) |
| Approvals | UL, ENEC, CQC, CE, EAC, NSF, ROHS |
NTC 5 K, NTC 10 K, PTC and Pt1000 sensors can be used, and all sensors must be the same type.
It has three relays: DO1 for the compressor, DO2 for defrost and DO3 for the fan.
Press the UP and DOWN keys simultaneously for 3 seconds; the display shows "unl" for 3 seconds.
Applications AP0 to AP6 are available, covering medium and low temperature ventilated cooling units with natural or electric defrost.