User guide for the Cole-Parmer 04750-51 Variable-Speed Vortex Mixer, covering operation, safety, cleaning, accessories, warranty and specifications.
The guide describes the Cole-Parmer 04750-51 Variable-Speed Vortex Mixer, a laboratory device with a rubber cup, speed control dial, power button, mode button, IEC connector and retort rod fitting. It covers operating conditions, electrical installation, safety advice, operation, accessory heads, cleaning, servicing, accessories and technical specifications.
The listed specifications include speed 250 to 2,500 rpm, orbit 4.2 mm, maximum load 1 kg, overall dimensions 78 x 135 x 215 mm, net weight 3.2 kg, and 90 - 240V, 20W electrical supply. It also states indoor use, ambient temperature +5°C to +40°C, altitude to 2000m, relative humidity not exceeding 80%, and continuous or touch mixing modes.
| Operating location | Indoor use only |
|---|---|
| Ventilation | Use in a well ventilated area |
| Ambient temperature range | +5°C to +40°C (+41°F to +104°F) |
| Altitude | To 2000m (6500 ft) |
| Relative humidity | Not exceeding 80% |
| Power supply fluctuations | Not exceeding 10% of nominal |
| Overvoltage category | II IEC60364-4-443 |
| Pollution degree | 2 IEC664 |
| Minimum clearance | 200mm (8 in.) all round |
| Power requirements | 20W Universal 90-240V |
| Speed | 250 to 2,500 rpm |
| Orbit | 4.2 mm (0.165 in.) |
| Continuous mode | Yes |
| Accessory heads | Yes |
| Maximum load | 1 Kg (2.2 lb) |
| Overall dimension | 78 x 135 x 215 mm (3 x 5.3 x 8.5 in.) |
| Net weight | 3.2 kg (7 lb) |
| Electrical supply | 90 - 240V, 20W |
Press the MODE button; the light changes to show continuous mode.
The technical specification lists 250 to 2,500 rpm.
No. Accessory heads should always be used in continuous mode.
The equipment is warranted for three years when used under normal laboratory conditions.