Chrysler 2014 Grand Cherokee TCM Flash Service Bulletin 21-026-14

Chrysler technical service bulletin 21-026-14 on reprogramming the Transmission Control Module of 2014 Grand Cherokee vehicles with 3.0L engine and 8HP70…


Chrysler 2014 Grand Cherokee TCM Flash Service Bulletin 21-026-14 - cover page
Brand
Chrysler
Category
Vehicle maintenance
Document type
Service Manual
Language
English
Pages
3
File format
PDF
File size
113 KB
Published
10 November, 2026
Updated
10 November, 2026
MD5 checksum
1D138A5846C42278A21DB086F4F55C16

About this manual

This is Chrysler Technical Service Bulletin 21-026-14, dated August 27, 2014, in the Transmission and Transfer Case group. It supersedes bulletin 21-011-13 and covers flash reprogramming of the Transmission Control Module (TCM) with new software on 2014 (WK) Grand Cherokee vehicles built on or before July 01, 2014 that are equipped with the 3.0L engine (Sales Code EXF) and the 8HP70 Automatic Transmission (Sales Code DFD).

The bulletin lists the shift quality and drivability symptoms addressed by the flash, describes diagnosis with the wiTECH scan tool and TechCONNECT to verify no Diagnostic Trouble Codes are set, and gives the repair procedure: reprogram the TCM with wiTECH release 15.01 or higher, then clear any DTCs set in other modules. It also notes that shift adaptives in the TCM memory must not be cleared, and gives the warranty policy, labor operation 18-19-05-E9 at 0.2 Hrs, and the failure code FM Flash Module.

What's inside

  • Overview
  • Models
  • Symptom/Condition
  • Diagnosis
  • Repair Procedure
  • Policy
  • Time Allowance
  • Failure Code

Specifications

Vehicle application2014 (WK) Grand Cherokee
Build date limitBuilt on or before July 01, 2014 (MDH 0701XX)
Engine3.0L (Sales Code EXF)
Transmission8HP70 Automatic (Sales Code DFD)
Required wiTECH software levelRelease 15.01 or higher
Battery charging voltage during flashNot below 13.2 V and not above 13.5 V
Labor operation18-19-05-E9, 0.2 Hrs
Expected flash download timeApproximately 10 minutes
Failure codeFM Flash Module

Frequently asked questions

Which vehicles does bulletin 21-026-14 apply to?

It applies to 2014 (WK) Grand Cherokee vehicles built on or before July 01, 2014 with the 3.0L engine (Sales Code EXF) and the 8HP70 Automatic Transmission (Sales Code DFD).

What wiTECH software release is needed to perform the flash?

The wiTECH software level must be release 15.01 or higher.

Should the shift adaptives be cleared after reprogramming?

No. The bulletin states that clearing the shift adaptives in the TCM memory may cause the transmission to not shift smoothly until they are re-learned.

How much labor time is allowed for the TCM reflash?

Labor operation 18-19-05-E9 (Module, Transmission Control (TCM) - Reflash) is allowed 0.2 Hrs.

Download PDF (113 KB)

More Chrysler Manuals


View all Chrysler manuals →