User manual for Bushnell Elite 3.5-21x50 DMR II tactical riflescope covering adjustment, reticle use, bore sighting, and maintenance.
This manual provides detailed instructions for operating and adjusting the Bushnell Elite 3.5-21x50 DMR II, DMR II-I, and HDMR II tactical riflescopes. It covers key components like the fast-focus eyepiece, power change ring, side focus, windage and elevation turrets, and the REVLIMITER™ zero stop. It also explains how to bore sight and zero the scope, use first focal plane reticles, and perform maintenance. The manual includes diagrams and step-by-step procedures for calibration and turret adjustments.
| Magnification Range | 3.5-21x |
|---|---|
| Reticle Types | Bushnell G3/G3-i and Horus Vision H59 |
| Windage Adjustment | 10 mils per revolution |
| Elevation Adjustment | 10 mils per revolution |
Lift the turret into the upward position, rotate it right or left, and each click represents .1 mil. Push it down to lock or leave it up for further adjustments.
Remove the turret knob, align the “zero” mark with the vertical index line, and tighten the screw while keeping the knob locked.
It locks the turret at the zero position after setting it to prevent accidental movement during use.
Remove the bolt, sight through the barrel at a 100 yard target, then adjust the scope’s turrets to align the crosshairs with the target.