This owner's guide covers mounting, adjustments, parallax compensation, and care instructions for the Bushnell Banner 2 riflescope.
This manual provides instructions for mounting the Bushnell Banner 2 riflescope to a rifle, including preliminary adjustments and safety warnings. It details the use of the included mounts compatible with Weaver and Picatinny rails and specifies recommended torque settings for the mounting rings.
The guide explains how to perform preliminary and final sight-in procedures, including the use of a bore sighter or traditional methods. It covers parallax compensation for high-magnification models using the adjustable objective and describes how to adjust windage and elevation dials marked in MOA.
| Parallax-free distance | 100 yards |
|---|---|
| Windage/Elevation adjustment | 1/4 MOA per click |
| Adjustment revolution | 15 MOA |
| Ring cross-bolts torque | 30-35 lbf*in |
| Ring cap screws torque | 13-15 lbf*in |
Parallax error occurs when placing your eye at different positions behind the eyepiece causes the reticle crosshairs to appear to move around to different points on your target.
Line up the estimated distance to your target with the index dot on the adjustable objective to eliminate aiming errors caused by parallax.
The recommended torque is 30-35 lbf*in for the cross-bolts/lugs and 13-15 lbf*in for the ring cap screws.