Operation manual for Biamp WS-4/WS-10 and EWS-4/EWS-10 wall-mounted networked paging stations, covering installation, connections, Device ID and PIN security.
The WS-4 and WS-10 are wall-mounted networked paging stations with embedded DSP and on-board memory for standard and advanced public address functionality. Device-specific configuration is stored locally, so they do not rely on a centralized controller for processing and page routing. The EWS-4 and EWS-10 are the emergency versions used in an EN 54-16 certified life safety system.
The manual covers physical connections and assignment, installation, front-panel controls, rear connections, Device ID setting, CobraNet audio networking, auxiliary accessories, and PIN security. It refers readers to the Vocia Help File for software setup details.
| Device type | Wall-mounted networked paging station |
|---|---|
| Microphone polar pattern | Hypo-cardioid |
| Recommended microphone distance | 1 to 3 inches (25 to 75 mm) |
| Maximum ambient operating temperature | 32°-113° F (0°-42°C) |
| Device ID format | Hexadecimal |
| Factory default Device ID | 01 |
| Maximum cable distance to Ethernet switch | 328 feet (100 meters) with copper cabling |
| PoE requirement | 802.3at Type 1 (class 2) compliant |
| Auxiliary power | 24V DC |
| Maximum screw head height | 0.157 inches (4mm) |
The EWS-4 and EWS-10 are emergency wall-mounted networked paging stations used in an EN 54-16 certified life safety system, with the same configurable page codes, memory and features as the WS-4 and WS-10.
The factory default Device ID is 01.
The maximum cable distance between any unit and an Ethernet switch is 328 feet (100 meters) when using copper cabling.
A two-way connector may be used to power the EWS-4 or EWS-10 from an auxiliary 24V DC power supply, and Links CN11 and CN12 must be removed.