Vocia® Auxiliary Microphone 1 (VAM-1) is a portable microphone unit designed to serve as a slave device to the Vocia® wall mount and desk call stations (WS-4/10 and DS-4/10) series of call stations, and as a slave device for Vocia Input 6 (VI-6) for calls. Each VI-6 can support up to 4 VAM-1 slave microphones. The VAM-1 consists of a single push-to-talk (PTT) switch and indicator lights that show waiting, talking, and call unavailable states. The microphone clip is a magnetic clip for easy docking with the base. The unit is powered by the host device.
This two-page Chinese datasheet presents the Biamp Vocia VAM-1 auxiliary microphone, a standalone microphone used as a slave unit for the Vocia wall and desktop paging stations (WS-4/10 and DS-4/10) and for the Vocia Input 6 (VI-6) via its paging port. Up to four VAM-1 slave microphones can be connected to each VI-6. The unit centers on a push-to-talk (PTT) key and LEDs that show waiting, talk and call-unavailable states, and its microphone attaches to the base with a magnetic catch. Power comes from the host device, and audio, power and control travel over a single Ethernet cable.
The datasheet reproduces the architectural specification text, which describes direct connection to Vocia DS-4/10, EWS-4/10 or VI-6 paging stations and analog audio input devices, driving over standard CAT5e/6 cable and mounting in a standard single-gang back box. A back-panel drawing and a full technical specification table follow, covering network connection, microphone type and frequency response, THD+N, signal-to-noise ratio, input and output levels, power consumption, dimensions, weight, maximum cable length, operating environment and certifications. This manual is written in Chinese.
| Network connection | RJ-45 connector with shielded Ethernet cable (CAT5, CAT5e, CAT6 or CAT7) |
|---|---|
| Microphone type | Dynamic microphone with dual transducers (unmonitored) |
| Frequency response | 20 Hz to 10 kHz, +0, -1 dB |
| THD+N | < 0.08% (20 Hz to 10 kHz) |
| Maximum input | 125 dB SPL |
| Power (from host) | 12 V DC, 50 mA |
| Dimensions | Height 136.5 mm, width 62 mm, depth 55 mm |
| Weight | 250 g |
| Maximum cable length | 30 m |
| Operating temperature | -5 to 40 °C |
| Ingress protection | IP30 |
| Certifications | EN 54-16, CE marking, UL, RoHS |
Up to four VAM-1 slave microphones can be connected to each VI-6.
No. It is a direct connection to a paging station or VI-6 and is not Ethernet, so it must not be connected to a switch or PoE.
It is powered by the host device.
It carries a five-year Biamp Systems warranty.