Bestway 58390 filter pump owner's manual covering safety instructions, pedestal fixing, operation, filter cartridge maintenance and storage.
This owner's manual for the Bestway 58390 swimming pool filter pump sets out the safety precautions for installing and using the pump, including grounding and GFCI requirements and the warning that the pump cannot be used while people are inside the pool. It states that the pump is for use with storable pools only.
The manual then explains pedestal fixing under the EN60335-2-41 test standard, how to start the pump using the air purge valve, daily filter cartridge cleaning and replacement, and how to drain, dry and store the pump. A warranty section points to bestwaycorp.com and bestwaycorp.com/support, and the closing pages list Bestway's regional distributors.
| Pedestal hole diameter | 9 mm |
|---|---|
| Pedestal hole spacing | 163 mm |
| Minimum pedestal weight | over 18 kg |
| Storage temperature | 4-40°C (39.2-104°F) |
| Minimum pool distance from electrical outlet | 6 feet (1.8 m) |
| RCD rated residual operating current | not exceeding 30 mA |
| Motor | Thermally protected, CSA Enclosure 3 |
| Pool compatibility | Storable pools only |
No. The manual warns that the pump cannot be used while people are inside the pool.
Clean the filter cartridge every day, and replace it with a new one every two weeks for sanitary reasons.
Open or unscrew the air purge valve on top of the pump, screw it closed once water comes out, then insert the plug.
No. The manual says not to use an extension cord to connect the unit to the electric supply; a properly located outlet should be provided.