ATTACK PELLET Automatic Plus 8-30 kW Wood Pellet Boiler User Manual

User manual for the ATTACK PELLET Automatic Plus 8-30 kW wood pellet boiler, covering installation, operation, maintenance and troubleshooting.


ATTACK PELLET Automatic Plus 8-30 kW Wood Pellet Boiler User Manual - cover page
Brand
ATTACK
Category
Heater
Document type
User Manual
Language
Spanish
Pages
45
File format
PDF
File size
1.6 MB
Published
17 November, 2026
Updated
17 November, 2026
MD5 checksum
2E179C7424BF8C5661D4D2C94CF3C872

About this manual

ATTACK PELLET Automatic Plus 8-30 kW is a wood pellet boiler for heating single-family houses, shops, industrial halls and similar buildings. The manual covers its description, parameters, installation, burner operation, cleaning, maintenance and troubleshooting.

The boiler burns wood pellets 6-10 mm in diameter and up to 35 mm long, with automatic burner cleaning and automatic heat-exchanger cleaning via turbulators. It includes a 450 l pellet silo and screw conveyor; an electric resistance up to 6 kW can be used as an emergency heat source. This manual is written in Spanish.

What's inside

  • Important information
  • Introduction
  • General description
  • Boiler parameters
  • Installation and mounting
  • Burner operation
  • Cleaning and maintenance
  • Troubleshooting
  • Disposal instructions

Specifications

Rated boiler power30 kW
Power range8-30 kW
Heat exchange area1.9 m2
Recommended flue draft15-20 Pa
Maximum water overpressure250 kPa
Water pressure loss152 Pa (ΔT=10 K); 38 Pa (ΔT=20 K)
Boiler weight355 kg
Flue outlet diameter150 mm
Boiler height1220 mm
Boiler width575 mm
Boiler depth1250 mm
Electrical protectionIP40
Maximum absorbed power at ignition600 W
Electrical power in operation90 W
Efficiency90.6%
Emissions classClass 3 (EN 303-5)
Flue gas temperature at nominal power143 °C
Recommended fuelWood pellets, diameter 6-10 mm, maximum length 35 mm
Average fuel consumption2.4-6.9 kg/h
Water volume in boiler62 l
Heating water temperature adjustment range60-90 °C
Supply voltage230 V / 50 Hz
Minimum return water temperature65 °C
Recommended operating water temperature80-90 °C
Pellet silo volume450 l
Automatic ash removal intervalEvery 12 hours
Emergency electric resistance powerMaximum 6 kW
Emergency electric resistance length450 mm
Fuse10 A / 250 V

Frequently asked questions

What fuel should be used in the ATTACK PELLET Automatic Plus boiler?

The boiler is designed for wood pellets with a diameter of 6-10 mm and a maximum length of 35 mm.

What operating water temperature is recommended?

The recommended operating water temperature is 80-90 °C.

What happens if the system lacks Regumax OVENTROP mixing equipment?

The boiler loses warranty if the system is not installed with Regumax OVENTROP mixing equipment, which provides a minimum return water temperature of 65 °C.

How often is ash removed automatically?

The automatic model removes ash from the combustion chamber to the external drawer every 12 hours.

Download PDF (1.6 MB)

More ATTACK Manuals


View all ATTACK manuals →